BMW E36 DIY angle kit. 
 
Have you ever wanted to drive a Wisefab with your E36 BMW but it is too expensive or too wide to fit your car? Now you have the opportunity to modify the OEM control arms and build the kit that meets your demands. It requires quite a bit of measuring, cutting and welding, but the result is a cost-effective and capable lock-kit that is suitable for both street and competition use.
 
Here is a VIDEO that explains the whole procedure in-depth.
 
The Knuckle add-on is the same classic Wisefab part we've used on our pro kits for many years.
The wishbone extension, lock-stopper, bearing housing and the bearing itself are also made of the same material we use in the pro kit.
Camber plates are not included and are optional and can be purchased separately.
Tie rods (inner and outer) are not included. However, the necessary parts can be conveniently purchased from any spare parts store. For inner tie rods use Ford/Mazda part number EC0132240 or YL8Z3280EA. For tie rod ends use Ford/Mazda part number EC0132280 or 5L843289AA. NB! When buying tie rods make sure the inner end (rack side) is M14x1,5 male and outer end M16x1.5 male thread.
 
NB! Be sure to read the installation manual both before and after purchase. This gives a good overview of the tools and workload required.